| MH803 CAPACITY |
MARBLE
|
100~150㎡ / PER DAY（8 HOURS）
|
TERRAZZO
|
120~200㎡ / PER DAY（8 HOURS）
|
GRANITE
|
50~80㎡ / PER DAY（8 HOURS）
|
CONCRETE
|
300~600㎡ / PER DAY（8 HOURS）
|
| BUSHHAMMERED |
200~400㎡ / PER DAY（8 HOURS） |
※THE ABOVE DATA IS TEST UNDER NORMAL CONDITIONS AND ENVIRONMENT.
THE DATA WILL BE DIFFERENT IF CONDITIONS AND ENVIRONMENT IS CHANGED. |
|
| |
SHOCK -ABSORBER OF MH803AS IS SPECIAL DESIGNED FOR CONCRETE POLISHING.
|
SPEEDY DISASSEMBLE DESIGN: EASY TO DISASSEMBLE THE MACHINE WITHOUT ANY TOOLS.
|
DRIVING CONSTRUCTION IS A ROTATION PLATE AND THREE SATELLITES. IT CAN RAISE WORKING EFFICENCY 3~5 TIMES THAN TRADITIONAL MACHINE.
|
MH-803 GRINDING MACHINE IS PROVIDED WITH INVERTER. IT CAN BE SET FOR MANY FUNCTIONS. EX:RPM ADJUSTING:MOTOR STARTING TIME ; TORSION COMPENSATE...........
|
WATER TANK IS INSTALLED WITH A SOLENOID. WATER OUTPUT IS VERY CONVENIENT.
|
HANDLE'S ANGLE CAN BE ADJUSTED. SO, IT CAN BE SUITED WITH DIFFERENT BODY-HEIGHT.
|
|
| |
|
|
METAL DIAMOND GR3 |
|
|
|
FOR TILES HEIGHT DIFFER
OVER 2 mm |
FOR TILES HEIGHT DIFFER
BELOW 1.5 mm
|
FOR TILES HEIGHT DIFFER
BELOW 1.5 mm |
|
| |
TUNGSTEN STEEL－CR1 |
TUNGSTEN STEEL－CR2 |
METAL DIAMOND-CEMENT－CR3 |
|
|
|
FOR REMOVE IRREGULAR
SURFACE
（ OVER 3 mm）
OF CEMENT
AND
PAINT、GLUE
|
FOR REMOVE IRREGULAR SURFACE
（ BELOW 3 mm）
OF CEMENT AND
PAINT、
GLUE
|
FOR REMOVE SCRAPE OF
CR1
＆CR2 ON CEMENT AND
PAINT、GLUE
|
|
| |
| |
| |
POLISHING PAD # 1 |
POLISHING PAD #2 |
POLISHING PAD #3 |
POLISHING PAD # 4 |
|
|
|
|
|
FOR REMOVE THE HEIGHT
DIFFER
UNDER 0.5mm AND
SCRAPE
OF METAL DIAMOND
|
FOR REMOVE THE
SCRAPE
OF # 1 POLISHING PAD
|
FOR RAISE THE FINE
DEGREE
OF THE SURFACE
|
FOR RAISE THE
BRIGHTNESS
DEGREE OF THE SURFACE |
|
| |
|
C1SERIES
|
SUITABLE
|
POLISHED QUARTZ TILE
|
GRITS
|
＃1、＃2、＃3、＃4
|
SIZE |
 50、80、100、125、188㎜ |
|
|
|
C3SERIES |
SUITABLE
|
MARBLE OR LOWER HARDNESS TILE
|
GRITS
|
＃1、＃2、＃3、＃4
|
SIZE |
50、80、100、125、188㎜ |
|
| |
|
|
C6SERIES |
SUITABLE
|
GRANITE OR HIGHER
HARDNESS TILE
|
GRITS
|
＃1、＃2、＃3、＃4
|
SIZE |
50、80、100、125、188㎜ |
|
|
|
C9SERIES |
SUITABLE
|
CONCRETE、LIMESTONE、SANDSTONE
OR LOWER DENSITY TILE
|
GRITS
|
＃1、＃2、＃3、＃4
|
SIZE |
50、80、100、125、188㎜ |
|
|
| |
CHA-C5
POLISHING DISC |
POLISHING POWDER
FOR GRANITE |
 |
 |
|
|
SUITABLE POLISHING FOR GRANITE |
|
| |
NATURAL BLEND TAN
|
POLISHING POWDER FOR MARBLE |
 |
 |
|
|
SUITABLE POLISHING FOR MARBLE |
|
| |
“R”GRINDING WHEEL |
 |
|
THE FUNCTION AS BUSHHAMMERED
（AS RIGHT PICTURE） |
|
|
| |
