CHA ENTERPRISE CO., LTD.

*MH430 SERIES
MH430 SERIES IS MULTI-FUNCTION GRINDING
MACHINE. ALL PARTS OF MACHINES ARE
PROCESSED WITH HIGH QUALITY. WE IMPROVE
THE DEFECTS OF COMMON MACHINES AND MAKE
THE SINGLE-BRUSH MACHINE BETTER. 1443
SATELITE GEARS DRIVING SYSTEM CAN OFFER
STRONGER TORSION AND REDUCE THE NOISE.
SAFTY SWITCH CAN PREVENTS
NON-PROFESSIONAL TO START MACHINE.
ROTATING CONTROLS THE WATER OUTPUT,
SO THE WATER CAN OUTPUT STEADY AND
CONTINUED.MH430 SERIES GRINDING MACHINE
CAN BE USED ON ALL KINDS OF FLOOR.
EX: GRINDING. POLISHING. CRYSTALLIZE.
CLEANING. WAXING.....WE OFFER MANY
MODELS FOR CUSTOMERS TO USE IN THE
DIFFERENT ENVIRONMENT.

MODEL

MH430-AD

1.5HP

VOLTAGE

220V / 110V

AMPERE

8A / 15A

HERTZS

50/60HZ

SPEED

MODEL	SPEED
MODEL	50HZ	60HZ
430ADS	150	190
430ADM	200	250
430ADH	250	300

DIAMETER

10"(250mm)

WATER-TANK

5LTS

NOISE

65Db

WEIGHT

37KGS

MH430-AD CAN MATCH WITH 380㎜
WORKING PLATE FOR EDGE GRINDING

MH430-AD IS SPECIAL DESIGNED TO USE ON STAIR.

MH430-AD IS SPECIAL DESIGNED TO USE ON STAIR.

THE HEIGHT OF HANDLE IS ADJUSTABLE, SO IT CAN ALSO OPERATE ON THE FLOOR.
FUNCTIONS : GRINDING . POLISHING . CLEANING.....

PLATE FOR METAL DIAMOND 260mm FOR REMOVE THE HEIGHT DIFFER BETWEEN SLABS	METAL DIAMOND GR1	80x5mm	FOR TILES HEIGHT DIFFER OVER 2 mm
	METAL DIAMOND GR2	80x5mm	FOR TILES HEIGHT DIFFER BELOW 2 mm
	METAL DIAMOND GR3	80x5mm	FOR TILES HEIGHT DIFFER BELOW 1.5 mm
	TUNGSTEN STEEL CR1	80mm	FOR REMOVE IRREGULAR SURFACE (OVER 3 mm) OF CEMENT AND PAINT 、GLUE
	TUNGSTEN STEEL CR2	80mm	FOR REMOVE IRREGULAR SURFACE ( BELOW 3 mm) OF CEMENT AND PAINT 、GLUE
	METAL DIAMOND CR3	80mm	FOR REMOVE SCRAPE OF CR1 & CR2 ON CEMENT AND PAINT、GLUE

ABRASIVE PLATE

260mm
ABRASIVE PLATE
(FOR MATCH WITH 80mm POLISHING PADS)

EDGE GRINDING PLATE

380mm
SUTABLE FOR EDGE GRINDING

POLISHING PAD #1	POLISHING PAD #2	POLISHING PAD #3	POLISHING PAD #4

FOR REMOVE THE HEIGHT DIFFER UNDER 0.5mm AND SCRAPE OF METAL DIAMOND	FOR REMOVE THE SCRAPE OF # 1 POLISHING PAD	FOR RAISE THE FINE DEGREE OF THE SURFACE	FOR RAISE THE BRIGHTNESS DEGREE OF THE SURFACE

	C1 SERIES
	SUITABLE	POLISHED QUARTZ TILE
	GRITS	＃1、＃2、＃3、＃4
	SIZE	50、80、100、125、188㎜

	C3 SERIES
	SUITABLE	MARBLE OR LOWER HARDNESS TILE
	GRITS	＃1、＃2、＃3、＃4
	SIZE	50、80、100、125、188㎜

	C6 SERIES
	SUITABLE	GRANITE OR HIGHER HARDNESS TILE
	GRITS	＃1、＃2、＃3、＃4
	SIZE	50、80、100、125、188㎜

	C9 SERIES
	SUITABLE	CONCRETE、LIMESTONE、SANDSTONE OR LOWER DENSITY TILE
	GRITS	＃1、＃2、＃3、＃4
	SIZE	50、80、100、125、188㎜

POLISHING PLATE WITH LEAD	"R" GRINDING WHEEL
260MM	260MM
POLISHING PLATE FOR GRANITE	THE FUNCTION AS BUSHHAMMERED