MH503
MH503-AS

MH503：SUITABLE FOR MARBLE、GRANITE GRINDING
MH503AS: SUITABLE FOR CONCERTE 、MARBLE、GRANITE GRINDING

MH-503 IS A HIGH PERFORMACE GRINDING MACHINE.IT IS DESIGNED WITH HIGH TECHNOLOGY AND ACCURATE RESEARCH.
MH-503 CAN MATCH WITH MANY KINDS OF GRINDING MATERIAL. EX:METAL DIAMOND . DIAMOND PAD . R-TYPE ROLLER.....

MODEL

 　MH503

Motor

　5HP

Ampere

 　22A

Voltage

 　1PH 220V

Hertz

 　50/60HZ

Disc speed

 　300~1200RPM

Diameter

　430MM

Disc diameter

 　188MM

Watertank

 　30L

Noise

 　75Db

Weight

 　140KGS
THE OTHER VOLTAGE FOR CHOICE: 3PH 220V ; 3PH 380V
 
 
 
MH503 CAPACITY
MARBLE 　30~60㎡ / PER DAY（8 HOURS）
TERRAZZO
 　50~80㎡ / PER DAY（8 HOURS）
GRANITE
 　20~30㎡ / PER DAY（8 HOURS）
CONCRETE
 　100~200㎡ / PER DAY（8 HOURS）
BUSHHAMMERED 　100~200㎡ / PER DAY（8 HOURS）
※THE ABOVE DATA IS TEST UNDER NORMAL CONDITIONS AND ENVIRONMENT.
　 THE DATA WILL BE DIFFERENT IF CONDITIONS AND ENVIRONMENT IS CHANGED.


SHOCK -ABSORBER OF MH503AS IS SPECIAL DESIGNED FOR CONCRETE POLISHING.


SPEEDY DISASSEMBLE DESIGN: EASY TO DISASSEMBLE THE MACHINE WITHOUT ANY TOOLS.


DRIVING CONSTRUCTION IS A ROTATION PLATE AND THREE SATELLITES. IT CAN RAISE WORKING EFFICENCY 3~5 TIMES THAN TRADITIONAL MACHINE.


MH-503 GRINDING MACHINE IS PROVIDED WITH INVERTER. IT CAN BE SET FOR MANY FUNCTIONS. EX:RPM ADJUSTING:MOTOR STARTING TIME ; TORSION COMPENSATE...........


WATER TANK IS INSTALLED WITH A SOLENOID. WATER OUTPUT IS VERY CONVENIENT.


HANDLE'S ANGLE CAN BE ADJUSTED. SO, IT CAN BE SUITED WITH DIFFERENT BODY-HEIGHT.
 

METAL DIAMOND GR1

METAL DIAMOND GR2
METAL DIAMOND GR3




FOR TILES HEIGHT DIFFER
OVER 2 mm

FOR TILES HEIGHT DIFFER
BELOW 1.5 mm

FOR TILES HEIGHT DIFFER
BELOW 1.5 mm
 

TUNGSTEN STEEL－CR1

TUNGSTEN STEEL－CR2

METAL DIAMOND-CEMENT－CR3



FOR REMOVE IRREGULAR
SURFACE （ OVER 3 mm）
OF CEMENT AND PAINT、GLUE

FOR REMOVE IRREGULAR
SURFACE （ BELOW 3 mm）
OF CEMENT AND PAINT、GLUE

FOR REMOVE SCRAPE OF
CR1 ＆CR2 ON CEMENT AND
PAINT、GLUE
 

POLISHING PAD # 1

POLISHING PAD #2

POLISHING PAD #3

POLISHING PAD # 4




FOR REMOVE THE
HEIGHT DIFFER UNDER
0.5mm AND SCRAPE OF
METAL DIAMOND

FOR REMOVE THE
SCRAPE
OF # 1 POLISHING PAD

FOR RAISE THE FINE
DEGREE
OF THE SURFACE

FOR RAISE THE
BRIGHTNESS
DEGREE OF THE SURFACE
 

C1SERIES

SUITABLE

POLISHED QUARTZ TILE

GRITS

＃1、＃2、＃3、＃4

SIZE

 50、80、100、125、188㎜
 

C3SERIES

SUITABLE

MARBLE OR LOWER HARDNESS TILE

GRITS

＃1、＃2、＃3、＃4

SIZE

 50、80、100、125、188㎜
   

C6SERIES

SUITABLE

GRANITE OR HIGHER
HARDNESS TILE

GRITS

＃1、＃2、＃3、＃4

SIZE

 50、80、100、125、188㎜
 

C9SERIES

SUITABLE

CONCRETE、LIMESTONE、SANDSTONE
OR LOWER DENSITY TILE

GRITS

＃1、＃2、＃3、＃4

SIZE

 50、80、100、125、188㎜
 
 
 

CHA-C5
POLISHING DISC

POLISHING POWDER FOR GRANITE


適用：花崗石拋光
 

NATURAL BLEND TAN

POLISHING POWDER FOR MARBLE

SUITABLE POLISHING FOR MARBLE
 

CHA-C3 5 x EXTRA


SUITABLE POLISHING FOR MARBLE
 

 

“R”GRINDING WHEEL

  


THE FUNCTION AS BUSHHAMMERED
（AS RIGHT PICTURE）